Setting Up The Monitor; Installation - Philips Evnia 49M2C8900 Series User Manual

2. Setting up the
monitor

2.1 Installation

1 Package contents
Power
* USB A-B
*USB C-C/A Screw and screwdriver
*Different according to region
2 Install the base
1. To well protect this monitor and
avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
Quick start
Register your product and get support at www.philips.com/welcome
* Remote Control
Batteries AAA R03 1.5V
VESA Bracket
*HDMI *DP
*USB C-C *USB C-A
M4 x 4
M5 x 2
2. Hold the stand with both hands.
(1) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
(2) Use a screwdriver to tighten the
assembly screws(M5),
the stand to the
(3) Gently attach the base to the
stand.
(4) Use your fingers to tighten the
49M2C8900
screw located at the bottom of
the base, and secure the base to
the stand tightly.
3. After attaching the base, erect
the monitor with both hands
holding the monitor together with
styrofoam firmly. Now you can pull
out the styrofoam. When you pull
out the styrofoam, do not squeeze
the panel .
Warning
This product is curve design, when
attach / detach the base, place the
protective material under the monitor
and do not press down the monitor to
avoid the damage.
5
and secure
monitor tightly.
2
1
3
4