Philips Evnia 49M2C8900 Series User Manual page 9

Some selected Philips displays may not
Power or Charge your device when it
enters "Sleep/Standby" mode (White
power LED blinking). In that case, please
enter to OSD Menu and select "USB
Standby Mode", then, turn the function
to "ON" mode (default=OFF). This will
then keep the USB power and charging
functions active even when the monitor
is in sleep/standby mode.
ambiglow
SmartImage Game Mode Ambiglow
USB-C Setting
HDMI Refresh Rate
OSD Setting USB Standby Mode
PIP/ PBP
KVM
Smart Size
USB Setting
Smart Power
Over Scan
Resolution Refresh Rate
5120X1440 240Hz
Warning
USB 2.4Ghz wireless devices, such
as wireless mice, keyboards, and
headphones, may result in decreased
efficiency of radio transmission of USB
3.2 devices. Should this happen, please
try the following methods to help
reduce the effects:
• Try to keep USB 2.0 receivers away
from a USB 3.2 connection port.
• Use a standard USB extension cable
or USB hub to increase the space
between your wireless receiver and
the USB3.2 connection port.
Input Audio System Setup
High Resolution
On
On Off
Auto
Input Source Adaptive Sync SmartImage
HDMI 1 On Standard
Close
Select
OK
Back
7