Philips Evnia 49M2C8900 Series User Manual page 30

A reminder message that pops up after 4 hours of
continuous use, and will then appear every 2 hours
after.
To maintain the panel quality, Pixel Refresh will automatically
run after in use for a periods of time.
Pixel Refresh will take few minutes and Power LED will blink
until it is �nished.
Please do not unplug the power cable during the process.
Accumulative usage: 4HOURS
Do you want to activate Pixel Refresh now?
Yes
Compulsory execution message
To maintain the panel quality, Pixel Refresh will automatically
run after in use for a periods of time.
Pixel Refresh will take few minutes and Power LED will blink
until it is �nished.
Please do not unplug the power cable during the process.
Accumulative usage: 16HOURS
Proceed
• Auto Warning
Default setting is On to provide
messages as reminders of Pixel Refresh
automatically. You can go to OSD menu
> Setup > OLED Panel Care > Auto
Warning to turn off Auto Warning
messages. If you turn off Auto Warning,
the messages will not appear, yet the
calculation of cumulative usage hours
continues. If Auto Warning is set to
Off, the cumulative usage exceeds 16
hours, Pixel Refresh will be activated
automatically when you press the power
button or the monitor goes into Standby
mode.
A reminder message that pops up after 4 hours of
continuous use, and will then appear every 2 hours
after.
To maintain the panel quality, Pixel Refresh will automatically
run after in use for a periods of time.
Pixel Refresh will take few minutes and Power LED will blink
until it is �nished.
Please do not unplug the power cable during the process.
Accumulative usage: 4HOURS
Do you want to activate Pixel Refresh now?
Yes
No
No
28
Note
1. When the monitor is in standby
mode for over two hours, Refresh
will recognize this and run
automatically. Also, if the user
turns off the monitor Refresh will
run automatically. This ensures
your display has the best possible
performance while minimizing the
amount of interruptions.
2. Please note that if the temperature
inside the monitor's shell reaches
a temperature of over 45 degrees
Celsius, Pixel Refresh cannot be
activated.
LED Indicator
Status
Power On
Standby
Pixel Refresh
Panel Error
Power Off
LED Color
White
White (breathing)
White (blinking)
Amber
No LED