Philips Evnia 49M2C8900 Series User Manual page 12

EasyLink (CEC)
4
What is it?
HDMI is a single cable to carry both
picture and audio signals from your
devices to your monitor, saving you from
cable clutter. It carries uncompressed
signals, ensuring that you have the
highest quality from source to screen.
HDMI-connected monitors with Philips
EasyLink (CEC) allow you to control
functions of multiple connected devices
with one remote control. Enjoy high
quality picture and sound without
clutter or fuss.
How to enable EasyLink (CEC)
ambiglow
SmartImage Game Mode Ambiglow Input
Power LED Brightness
CEC (On, Off)
Contrast
Language
SmartContrast
Resolution Notice
CEC Gamma
OLED Panel Care Sharpness
OLED Information sRGB
Information Color Temperature
Resolution Refresh Rate Input Source
5120X1440 240Hz
1. Connect an HDMI-CEC compliant
device through HDMI.
2. Configure the HDMI-CEC compliant
device properly.
3. Switch on EasyLink(CEC) of this
display by toggling to the right to
enter OSD.
4. Select [Setup] > [CEC].
5. Select [On], and then confirm the
selection.
6. Now, you can turn on or off both
your device and this display using
the same remote control.
Audio System Setup
Off
Adaptive Sync SmartImage
HDMI 1 On Standard
Note
1. The EasyLink-compliant device must
be switched on and selected as the
source.
2. Philips does not guarantee 100%
interoperability with all HDMI CEC
devices.
Close
Select
OK
Close
10