Fisher & Paykel DW60UT4HI2 User Manual page 37

PROBLEM POSSIBLE CAUSE
Water marks Rinse aid level or dosage
left on
setting is too low.
glasses and
cutlery
Scale Water softener setting is
buildup on
too low.
dishwasher
surfaces
No salt
TROUBLESHOOTING
WHAT TO DO
Ensure there is rinse aid in dispenser. If
necessary, increase the rinse aid setting
or try using a wash program with a
higher temperature. Refer to 'Rinse aid'
for information.
Increase the water softener setting. Refer
to 'Water softener'.
Increase the rinse aid setting and
the amount of detergent. Refer to
'Preferences' and 'Water hardness'.
If living in an area with very hard
water, consult a plumber on installing a
household water softener.
Fill the salt reservoir. Refer to 'Water
softener' and 'Using the salt reservoir'.
37