1. Manuals
  2. Brands
  3. Light Sky Manuals
  4. Spotlight
  5. SUPER SCOPE
  6. User manual

Light Sky SUPER SCOPE MAX User Manual

Hide thumbs Also See for SUPER SCOPE MAX:
Table of Contents

Advertisement

Quick Links

Download this manual
SUPER SCOPE MAX

Advertisement

Table of Contents
loading

Related Manuals for Light Sky SUPER SCOPE MAX

Summary of Contents for Light Sky SUPER SCOPE MAX

  • Page 1 SUPER SCOPE MAX...

  • Page 2: Table Of Contents

    CONTENTS 1. Safety Instructions......................2 2. Technical Specifications ....................5 2.1 Attachment And Size .....................8 3. Control Panel ........................9 4. Effect Wheels........................10 4.1 Replacing Rotating Gobos..................11 5. How To Set The Unit.......................13 5.1 Main Function......................13 5.2 Home Position Adjustment .................20 6. Control By Universal DMX Controller .................26 6.1 DMX 512 Connection...................26 6.2 Channel Setting....................27 6.3 Address Setting ....................27...

  • Page 3: Safety Instructions

    1.Safety Instructions Please read the instruction carefully which includes important information about the installation, usage and maintenance. WARNING Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this manual. The following symbols are used to identify important safety information on the product and in this manual: Safety hazard.
  • Page 4 The unit must be installed in a location with adequate ventilation, at least 20cm from ► adjacent surfaces. Be sure that no ventilation slots is blocked, otherwise the unit will be overheated. ► Before operation, ensure that you are connecting this product to the proper voltage in ►...
  • Page 5 DO NOT operate this product if you see damage on the housing, shields, or cables. ► Have the damaged parts replaced by an authorized technician at once. Installation: The fixture should be fixed on the clamp. Always ensure that the unit is firmly fixed to avoid vibration and slipping off during operation.

  • Page 6: Technical Specifications

    Technical Specifications OPTICAL Light source: 1000W/1200W/1400W white LED module (optional) Zoom angle : 6° -50 ° Optical lens: coated with high anti-reflection film, 186mm diameter Color Temperature: 6500 K CRI : RA≥70 / RA≥90 (cut into the high-display digital filter) Total output :1000 w Light source : 43200 Lm;...
  • Page 7 Electronic dimming, 0-100% linear dimming, uniform spot Electron strobe speed is 1-25 times/S LED refresh frequency: 1000Hz ~ 25KHz CONTROL Control channel: 42CH, 56CH， See Channel table for details. Protocol: DMX512 protocol, RDM protocol, Art Net (optional) Data connection: Three core or five core signal input/output - RJ45 interface (optional) Display: LCD liquid crystal display (LCD) SOFTWARE...
  • Page 8 OTHERS - IP rate : IP20 - Working Ambient : -10℃~ 40 ℃ ℃ Maximum temperature of lamp body surface: 80 STANDARDS AND CERTIFICATION - The product implementation standard: GB 7000.1-2015 GB7000. 217-2008 、 Approved certifications: CE RoHs - The product complies with the following EU directives: Low Voltage Directive 2014/35/EU .

  • Page 9: Attachment And Size

    2.1.Attachment And Size Attachment contents-Fig.1 power cord Certificate of conformity Size-Fig.2...

  • Page 10: Control Panel

    3.Control Panel PG Version： 3 4 5 6 Neutrik Version： 11 4 5 6 1.Display: To show the various menus and the selected function 2.Button: OK confirmation key DOWN To the left To the right 3.PG version power input: connect to the power supply .FUSE：...

  • Page 11: Effect Wheels

    4.Effect Wheels Blue Green Orange C -B Turquoise CTO-A CTO-B Effect disc Rotating gobo wheel B Rotating gobo wheel A Rotation Gobo Size Drawing Drawing Serial Serial Part Number Part Number Number Number Number Number C 0 7 0 0 5 9 0 0 0 2 FG2061A FG2073A C 0 7 0 0 5 9 0 0 0 8...

  • Page 12: Replacing Rotating Gobos

    4.1.Replacing Rotating Gobos 1.Use a screwdriver to unscrew the two screws at A to take out the pattern color module assembly; 2. Reverse the assembly, and use a screwdriver to unscrew the five screws at B to separate the pattern color module from the CMY module; -11-...
  • Page 13 3. From the front of the pattern module, use a screwdriver to unscrew the screws of the two magnetic induction plates at C, and then remove the magnetic induction plates; then half loosen the motors in the four places at D Screws, remove the belt after moving the motor; turn the pattern module in reverse, and use a screwdriver to unscrew the four screws at E to take out the rotating patternDisc assembly 4.Gently lift the gobo holder from the edge of the rotating gobo wheel (reverse side)

  • Page 14: How To Set The Unit

    6. Do not touch the surface of the gobo with bare fingers. The gobo has a small position point at its edge which has to aim at the position point on the gobo holder as H shows (glossy side towards the light source). 7.Insert the gobo driven wheel into the driving wheel assembly, as shown in I, the gobo driven wheel pit must be positioned towards the center of the driving wheel.
  • Page 15 Address 1-512 Standard：42 Channel mode DMX SETTING Extended：56 DMX 512 Input mode Art-Net Power on time 0-99999H Fixture times LED on time 0-99999H All time 0-99999H LED TEMP Temperatures LEDDrv TEMP UID:0x3888XXXXXXXX Info Manufactory Label： RDM info MAX LIGHTING Device Labe： l 1200W DMX live 0-255...
  • Page 16 ● DMX SETTING Enter the MENU mode, select the setting function, press the OK button to confirm, use the up/down buttons to select: address code,Channel mode, input mode. DMX Address Select the DMX address, press the OK button to confirm, the current DMX address will be shown on the display.
  • Page 17 DMX Live Select the fan information, press the OK button to confirm, use the up and down keys to view the equipment: tail inlet fan, tail outlet fan, cutting fan,Pattern fan, focusing fan, tail inlet fan 1, tail inlet fan 2, tail inlet fan 3, tail outlet fan 1, tail outlet fan 2, tail outlet fan 3,Fan operation information such as cutting fan, CMY fan, pattern fan, bottom box fan board, etc.
  • Page 18 Display Select the display settings, press the OK button to confirm, you can use the up and down keys to select: language selection, backlight time, backlight adjustment, screen rotation,Press OK to enter the next menu level. Select language selection, use the up and down keys to select: Chinese/English, press the OK key to confirm and exit;...
  • Page 19 Led Preq Set Select the Led frequency setting, press the OK button to confirm, you can use the up and down keys to select: 1000 Hz, 3600 Hz, 7200 Hz,25000 Hz, press OK button to confirm, then press left/right button to return to the previous menu. ●...
  • Page 20 ● Service Enter the MENU mode, select the service option function, press the OK button to confirm, use the up/down buttons to select: lamp status, calibration,Factory setting. Fixture State Select the lamp status, press the up and down keys to select, press the OK button to confirm, you can see: memory chip, angle sensor, level encoder,Vertical encoder, horizontal, vertical, cyan, magenta, yellow, down color temperature, color wheel, pattern 1, pattern 1 rotation, pattern 2,Pattern 2 rotation, cutting rotation, zoom, focus, prism, prism rotation and other functions of the running status and error...

  • Page 21: Home Position Adjustment

    5.2. Home Position Adjustment Press the OK button to enter the menu mode, press the up and down buttons to select, press the OK button to confirm, you can fine-tune the position of the following functions from 0 to 255 (default 128), then press the left/right button to return to the previous menu.
  • Page 22 Enter the initial setting menu, use the up and down keys to select the Pan channel, use theleft and right keys to adjust the DMX value, the adjustment range is 0-255, and the default initial position is 128. Perform calibration, press the OK button to save and exit. Tilt Enter the initial setting menu, use the up and down keys to select the Tilt channel, use the left and right keys to adjust the DMX value, the adjustment range is 0-255, and the default initial...
  • Page 23 Gobo1 Enter the initial setting menu, use the up and down keys to select the Gobo1 channel, use the left and right keys to adjust the DMX value, the adjustment range is 0-255, the default initial position is 128, calibrate, press the OK button to save and exit. Gobo1.rot Enter the initial setting menu, use the up and down keys to select the Gobo1.rot channel, use the left and right keys to adjust the DMX value, the adjustment range is 0-255, the default initial...
  • Page 24 Blade DW2 Enter the initial setting menu, use the up and down keys to select the lower channels Blade DW2, use the left and right keys to adjust the DMX value, the adjustment range is 0-255, the default initial position is 128, perform calibration, press the OK button to save and exit. Blade LF1 Enter the initial setting menu, use the up and down keys to select the left channel Blade LF1, use the left and right keys to adjust the DMX value, the adjustment range is 0-255, and the default initial...
  • Page 25 Effect Enter the initial setting menu, use the up and down keys to select the Effect channel, use the left and right keys to adjust the DMX value, the adjustment range is 0-255, and the default initial position is 128. Perform calibration, press the OK button to save and exit. Enter the initial setting menu, use the up and down keys to select the CRI channel, use the left and right keys to adjust the DMX value, the adjustment range is 0-255, the default initial position is 128, calibrate, press the OK button to save and exit.
  • Page 26 Dimmer Enter the initial setting menu, use the up and down keys to select the Dimmer channel, use the left and right keys to adjust the DMX value, the adjustment range is 0-255, and the default initial position is 128. Perform calibration, press the OK button to save and exit. FosFor Gobo1 Enter the initial setting menu, use the up and down keys to select FosFor Gobo1 channel, use the left and right keys to adjust the DMX value, the adjustment range is 0-255, the default initial position...

  • Page 27: Control By Universal Dmx Controller

    6.Control By Universal DMX Controller 6.1.DMX 512 Connection 6.1.DMX 512Connection PG Version signal end DMX512 in Neutrik Version signal end DMX512 in DMX-input DMX - output 1 - Shield - Shield 2 - Signal (-) - Signal (-) - Signal (+) - Signal (+) - Not connected - Not connected...

  • Page 28: Channel Setting

    2. Connect the unit together in a “daisy chain” by XLR plug cable from the output of the unit to the input of the next unit. The cable cannot be branched or split to a “Y” cable. DMX 512 is a very high-speed signal.

  • Page 29: Dmx 512 Configuration

    6.4 DMX 512 Configuration Please control the fixture by referring to the configurations below 42 Channels (Mode1) Channel Function Note 0 - 255 Pan movement/positioning Pan fine 0 - 255 Fine Pan positioning TILT 0 - 255 Tilt movement/positioning TILT fine 0 - 255 Fine Tilt movement/positioning Functions...
  • Page 30 Channel Function Note GOBO2 20 - 29 GOBO3 30 - 39 GOBO4 40 - 49 GOBO5 50 - 59 GOBO6 60 - 69 Gobo 1 shake slow to fast/ GOBO1 70 - 79 Gobo 2 shake slow to fast/GOBO2 80 - 89 Gobo 3 shake slow to fast/GOBO3 90 - 99 Gobo 4 shake slow to fast/GOBO4...
  • Page 31 Channel Function Note Framing Macro No function 0 - 10 Square 11 - 20 rectangle 21 - 30 Isosceles triangle 31 - 40 trapezoidal 41 - 50 The Fan(Facing Up) 51 - 60 parallelogram 61 - 70 Right Angle trapezoid 71 - 80 The Fan(Down) 81 - 90...
  • Page 32 Channel Function Note Zoom 0 - 255 WIDE BEAM→NARROW BEAM Focus 0 - 255 Infinity→near Focus Fine 0 - 255 Fine Focus positioning Autofocus Distance 0 - 9 NO function 10 - 19 20 - 29 30 - 39 40 - 49 50 - 59 60 - 69 70 - 79...
  • Page 33 56 Channels (Mode2) Channel Function Note 0 - 255 Pan movement/positioning Pan fine 0 - 255 Fine Pan positioning TILT 0 - 255 Tilt movement/positioning TILT fine 0 - 255 Fine Tilt movement/positioning PAN TILT Speed 0 - 255 Pan Tilt movement Speed From Fast To Slow Functions 11 - 20 All Reset...
  • Page 34 Channel Function Note GOBO2 GOBO3 30 - 39 GOBO4 40 - 49 GOBO5 50 - 59 GOBO6 60 - 69 Gobo 1 shake slow to fast/ GOBO1 70 - 79 Gobo 2 shake slow to fast/GOBO2 80 - 89 Gobo 3 shake slow to fast/GOBO3 90 - 99 Gobo 4 shake slow to fast/GOBO4 100 - 109...
  • Page 35   Channel Function Note Blade LF1 0 - 255 Blade Out→In Blade LF1 Fine 0 - 255 Fine Blade positioning Blade LF2   Blade Out→In 0 - 255 Blade LF2 Fine Fine Blade positioning 0 - 255 Blade RF1 Blade Out→In 0 - 255 Blade RF1 Fine...
  • Page 36 Channel Function Note CRI Out 0 - 9 CRI In 10 - 255 Frost1 0 - 127 Frost From Min To Max 128 - 159 No Function 160 - 191 No Function 192 - 255 No Function Frost2 0 - 127 Frost From Min To Max 128 - 159 No Function...

  • Page 37: Electrical Connection Diagram

    7.Electrical Connection Diagram -36-...

  • Page 38: Error Information

    8.Error Information Error messages will be displayed under the Fixture state status menu when the fixture fails and they will not disappear until the fixture is repaired. 1. Memory IC: Check whether the Memory IC is damaged. Check whether the related circuit of the Memory IC is damaged.
  • Page 39 6. Tilt: Check whether there are other objects in the Y-axis running range interfering with its running and reset. Check whether the connecting wire connecting the Y-axis magnetic induction board is in poor contact or is disconnected. Check the Y-axis magnetic induction plate for looseness, falling off or damage.
  • Page 40 9. Yellow: Check whether there are other objects in the operation range of the Y color film interfering with its operation and reset. Check whether the connecting wire connecting the Y-color chip magnetic induction board is in poor contact or disconnected. Check the Y-chip magnets for looseness, falling off, or damage.
  • Page 41 12. Gobo1: Check whether there are other objects in the revolution and operation range of Gobo1 interfering with its operation and reset. Check whether the connection line of the connection Gobo1 male wheel magnetic induction board is in poor contact or disconnected. Check if the revolving magnet of Gobo1 is loose, fallen off or damaged.
  • Page 42 15. Gobo2 Rot.: Check whether there are other objects in the revolution and operation range of Gobo2 Rot. interfering with its operation and reset. Check whether the connection line of the connection Gobo2 Rot. male wheel magnetic induction board is in poor contact or disconnected. Check if the revolving magnet of Gobo2 Rot.
  • Page 43 18. Focus: Check whether there are other objects in the revolution and operation range of Focus interfering with its operation and reset. Check whether the connection line of the connection Focus male wheel magnetic induction board is in poor contact or disconnected. Check if the revolving magnet of Focus is loose, fallen off or damaged.

  • Page 44: Troubleshooting

    The position of each fan of the fixture: HeadFan11 HeadFan12 HeadFan8 HeadFan10 HeadFan7 HeadFan9 HeadFan3 HeadFan6 HeadFan5 HeadFan2 HeadFan4 HeadFan1 BaseFan1 BaseFan2 BaseFan3 BaseFan4 9.Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for troubleshooting: A.

  • Page 45: Fixture Cleaning

    10.Fixture Cleaning It is absolutely essential that the fixture is kept clean to ensure the maximum light-output and allow the fixture to function reliably throughout its life. The fixture must be cleaned regularly to avoid dust, dirt and smoke-fluid residues building up on or within the fixture. The cleaning frequency depends on the application environment.

Table of Contents