Advertisement
Available languages
Available languages
EN
WARNINGS AND CAUTIONS
Product pictures and specifications are subject to change without prior notice. The English version is a translation
of the original document in Spanish. In case of a discrepancy, the original will prevail.
EQUIPMENT MISUSE
• This device is for professional use only. Read all instruction manuals, tags, and labels before operating the device.
• The U·valve/U·valve
• Do not tamper the device.
• Use the device only for its intended purpose.
• Install and use the device following all local and national regulations including all health, safety and
environmental laws and regulations.
• Use only original spare parts kits from Samoa Industrial, S.A.
• This device has not been approved for being used in commercial transactions.
• Any unauthorised modification to the device, misuse, improper maintenance or identification label
removal may void the warranty.
• Regularly check the system components. Replace broken or worn parts.
CHEMICAL COMPATIBILITIES AND PRESSURE LIMITS
• The use of non-compatible fluids may cause damage in the device and serious personal injuries. See
technical specifications chapter.
• Do not exceed the maximum allowable working pressure of device. See technical specifications chapter.
• Do not exceed the permissible electrical ratings of the device. See technical specifications chapter.
• Observe the manufacturer's safety warnings for the fluids used.
SAFETY MEASURES
• Ensure that operators using this equipment are trained on the operation, the product and its limitations.
• Use safety equipment as required.
• To ensure the device safe operation, all service work should be done by qualified personnel only.
Disconnect the device from the mains, release the stored pressure and disconnect the equipment from
any fluid systems before carrying out any checks or replacing parts of the device.
EQUIPMENT OPERATION
• The device meter has been manufactured with tight tolerances in order to ensure high precision over a wide
range of flows and viscosity.
• Verify the correct settings of the monitoring system prior to the first use.
• Operation with flow rates close to range ends may cause a lack of accuracy of the measure. A calibration
procedure may be required in these cases.
INFORMATION ABOUT WASTES
The previous symbol indicates that in agreement with local laws, your product and/or your battery should be
disposed of independently of your home wastes. When this product reaches the final of its useful life, you will
need to take it to a collection point designated by the local authorities. The separate collection and the
product or battery recycling will help to protect the natural resources and guarantee its recycling in such a
way that protects the health of the people and environment.
2
838 844 R. 08/23
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
device is intended to be integrated into a fluid monitoring system.
+
Advertisement
