Advanced Option - NEC MultiSync X461UNV User Manual

ADVANCED OPTION

INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices
are connected.
All inputs except for TV*
NONE The Monitor will not search the other video input ports.
FIRST DETECT When the current video input signal is not present, then the monitor searches for a video signal
from the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
The monitor will not look for other video signals while the current video source is present.
LAST DETECT When the monitor is displaying a signal from the current source and a new secondary source
is supplied to the monitor, the monitor will automatically switch to the new video source.
When current video input signal is not present, the monitor searches for a video signal from
the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
VIDEO DETECT DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over
DVI, VGA, RGB/HV. When DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO
input signal is present the monitor will change and keep to the DVD/HD1, DVD/HD2, SCART,
VIDEO1, VIDEO2 or S-VIDEO input.
CUSTOM DETECT Set the priority of input signals.
When CUSTOM DETECT is selected, monitor searches listed inputs only.
INPUT CHANGE Sets input change speed.
NOTE: When "QUICK" is selected, picture may be distorted when signal input is changed.
This function should be chosen after all adjustment options have been made for the input.
LONG CABLE COMP Manually compensates for image degradation caused from using a long cable.
EQUALIZE
VGA, RGB/HV inputs only
POLE Adjusts frequency.
PEAK Adjusts equalizing value.
GAIN Adjusts gain value.
OFFSET Adjusts slice level of synchronized signal.
SYNC TERMINATE Selects the terminate resistance for matching the cable impedance.
RGB/HV inputs only
TERMINAL SETTING
DVI MODE Selects the kind of DVI-D equipment which is connected to the DVI input. Select "DVI-PC"
when PC or other computer equipment is connected. Select "DVI-HD" when DVD player,
which has DVI-D output, is connected.
BNC MODE Selects the kind of equipment which is connected to the BNC input.
RGB: Analog input
COMPONENT: Component
VIDEO:
SCART MODE Input mode for devices using SCART connectors.
HDMI SIGNAL RAW: Disable the expanded feature.
EXPAND: Expand image contrast and increase detail in the dark and bright areas.
SCAN CONVERSION Selects the IP (Interlace to Progressive) conversion function.
Note: For DVI input "DVI-HD" needs to be enabled in the DVI mode menu.
All inputs except VGA, RGB/HV
PROGRESSIVE Converts interlaced signals to progressive. This is the default setting.
INTERLACE Disables IP conversion. This setting is best suited for motion pictures, but increases the risk
of image retention.
*: The product you purchased may not have this feature.
English-25
FIRST DETECT
NORMAL
OFF
0
0
0
0
HIGH
DVI-PC
RGB
OFF
EXPAND
PROGRESSIVE