NEC MultiSync X461UNV User Manual page 28

COLOR SYSTEM
VIDEO1, VIDEO2, S-VIDEO inputs only
AUTO
NTSC
PAL
SECAM
4.43 NTSC
PAL-60
SCAN MODE
HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only
OVER SCAN
UNDER SCAN
120 Hz
(Not available)
EDGE COMP
(X462UN only)
ENABLE
BRIGHTNESS
TYPE
ADVANCED OPTION
RESET
FACTORY RESET
*: The product you purchased may not have this feature.
The selected Color System depends on the video format of the input signal.
Automatically chooses Color System setting based on input signal.
Some video formats may require different scanning modes in order to best display the image.
Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
Image size stays within the display area. The whole image is displayed on the screen.
Adjusts the brightness difference between the center and the edge of the screen.
This function is available when "ON" is selected.
Reduces the brightness in the center of the screen to allow for better consistency to the
brightness at the edge of the screen. A reduction of approximately 10-30% can be selected to
best match the surrounding environment and application.
Adjusts brightness curve from the center of the screen to the edge. Type 1 provides a gradual
decrease while Type 2 and Type 3 provide a steeper decrease.
Resets the following settings within the ADVANCED OPTION menu back to factory setting:
INPUT DETECT, INPUT CHANGE, LONG CABLE COMP, TERMINAL SETTING, SCAN
CONVERSION, COLOR SYSTEM, SCAN MODE.
Resets OSD options back to factory settings EXCEPT FOR: DATE & TIME, LANGUAGE,
OSD ROTATION, INPUT NAME, CHANGE SECURITY PASSWORD, SECURITY LOCK and
SECURITY PASSWORD.
English-26
AUTO
OVER SCAN
-
-
OFF
1
1
-
-