Basic Operation; Power On And Off Modes; Power Indicator - NEC MultiSync X431BT User Manual

Basic Operation

Power ON and OFF Modes

The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off.
NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the
Power Button on the front of the LCD.

Power Indicator

Mode
Power ON
Power OFF (Eco Standby)* 1
Power consumption under 0.5W*
Power OFF (Standby)
Power consumption under 1W*
Power Save
Power consumption under 2W*
Power Standby when
"SCHEDULE SETTINGS" enabled
Diagnosis (Detecting failure)
OFF
Power Button
Status Indicator Light
2
Green*
Red
3
Amber
3, 4
*
Amber Blinking
3, 5
*
Green and Amber blink alternately
Red Blinking
(See Troubleshooting page 34)
Main Power Switch
ON
Using the remote control
*1 When in Eco Standby Mode DDC/CI control does not function.
*2 If "OFF" is selected in POWER INDICATOR (page 23), the LED will not light when the
LCD monitor is in active mode.
*3 "RS-232C" is selected in EXTERNAL CONTROL.
*4 DDC/CI should be disabled.
*5 No DisplayPort connection.
English-16