Advertisement
Table of Contents
55 Watts - For GL-2121 and GL-2151 Golight GoBee Spotlights
Thank you for your purchase of the Larson Electronics GL-29000GB.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
•
RELEVANT LOCAL BUILDING CODES.
•
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF LUMINAIRES ELECTRICAL
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE RATED LUMINAIRE FIXTURES VOLTAGE.
•
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
THE
ELECTRICAL CODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING: MAKE SURE POWER IS TURNED OFF BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
RISK OF FIRE/ELECTRIC SHOCK –
RISK OF PERSONAL INJURY –
RISK OF BURN –
ALLOW FIXTURE TO COOL BEFORE SERVICING.
GoBee Replacement/Spare Bulb - 55 Watts - For GL-2121 and GL-2151 Golight GoBee Spotlights.
Replacement for the Golight Gobee GL-2121 and GL-2151 spotlights only. This lamp will NOT work on Golight Radioray or Golight
Stryker spotlights.
INSTALLATION
• Disconnect the fixture from power and ensure it is cool to the touch.
• Disconnect and remove the old bulb from the fixture.
• Replace old bulb with desired new replacement bulb.
• Connect the new replacement bulb and connect the fixture to power and continue use.
Larson Electronics, LLC
GoBee Replacement/Spare Bulb
Instruction Manual
GL-29000GB
MUST
DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
Phone: (800) 369-6671
BE
WIRED
IN
Fax: (903) 498-3364
ACCORDANCE
WITH
www.larsonelectronics.com
GL-29000GB
NATIONAL
1 of 2
Advertisement
Table of Contents
Related Manuals for Larson Electronics GL-29000GB
Summary of Contents for Larson Electronics GL-29000GB
- Page 1 GoBee Replacement/Spare Bulb 55 Watts - For GL-2121 and GL-2151 Golight GoBee Spotlights Instruction Manual Thank you for your purchase of the Larson Electronics GL-29000GB. WARNING: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. CRITICAL SAFETY INSTRUCTIONS: INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY •...
- Page 2 Inspect for good working condition prior to storage and before re-use. REPLACEMENT PARTS The GL-29000GB is designed to provide years of reliable performance. Should the need for replacement parts arise, please contact Larson Electronics. THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
Need help?
Do you have a question about the GL-29000GB and is the answer not in the manual?
Questions and answers