GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury.
Do not use this tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact Milwaukee Tool or a trained 1. Magnetic sleeve professional for additional information or training.
ASSEMBLY OPERATION Recharge only with the charger To reduce the risk of injury, always WARNING WARNING specified for the battery. For spe- wear proper eye protection marked cific charging instructions, read the operator’s to comply with ANSI Z87.1. manual supplied with your charger and battery. When working in dusty situations, wear appro- priate respiratory protection or use an OSHA Removing/Inserting the Battery...
Return the tool, battery pack, and charger to a MILWAUKEE service facility for repair. After six months to one year, depending on use, return the tool, battery pack and charger to a MILWAUKEE service facility for inspection.
Need help?
Do you have a question about the M12 2458-20 and is the answer not in the manual?
Questions and answers