Page 5
2 sec Switching on-off Press and hold the power button for 2 seconds. Low Battery LED If the red light will on, the battery is low. The tool will not be able to fi re nails. To continue work, charge the battery. Single Sequential Actuation Contact (Bump) Actuation...
Page 7
Single Sequential Actuation Contact (Bump) Actuation Switch to Contact Actuation: Switch to single sequential actiation: Press MODE Button - LED will light. Press MODE Button - LED will light. Pull and hold the trigger Push the tool against the work surface, compressing the workpiece contact.
Page 11
Do not dispose of used battery packs in the household refuse or by Winnenden, 2020-11-18 glasses. Following this rule will reduce the risk of serious personal burning them. Milwaukee Distributors off er to retrieve old batteries WARNING Read all safety warnings, instructions, to protect our environment.
Always wear goggles when using the machine. Complete the following checklist IN ORDER. If the tool does not work as it should, contact a MILWAUKEE service facility immediately. Always point tool away from yourself and others.
Need help?
Do you have a question about the M18 FNCS18GS and is the answer not in the manual?
Questions and answers