Commissioning - Man D 2876 LE 101 Operating Instructions Manual

Commissioning

Before daily starting the engine, check fuel level, coolant level and engine oil level and
replenish, if necessary.
Note:
Use only approved fuels, lubricants etc. (see brochure "Fuels, lubricants etc.").
Otherwise the manufacturer's warranty will become null and void.
Checking oil level
Check the oil level when the engine is
horizontal, but only if at least 20 minutes
have passed since the machine was
switched off.
D Pull out dipstick (arrow)
D wipe it with a clean, lintfree cloth
D and push it in again up to the stop
D Pull out dipstick again
The oil level should be between the two
notches in the dipstick and must never fall
below the lower notch. Top up oil as
necessary.
Caution:
Do not add so much engine oil
that the oil level rises above the
max. marking on the dipstick.
Overfilling will result in damage to
the engine.
Ensure outmost cleanliness when handl-
ing fuels, lubricants and coolants.
Commissioning and operation
15
Oil
?
MAX
MIN