Pepperl+Fuchs VIM62PP-E1V16-0PE-I420V15 Manual page 12

VIM6* Vibration Sensors
Installation
Caution!
The housing must be grounded!
The housing of the vibration sensor must be grounded when mounting, either via the machine
body or via a separate protective conductor (PE)!
Caution!
Do not perform any electrical modifications!
It is not permitted to perform electrical modifications on the vibration sensor. If you open or
modify the device yourself, you are endangering yourself and others, voiding any warranty, and
absolving the manufacturer of any liability.
Caution!
Ensure that the data cable and power supply cable are physically separated!
To prevent interference, route the cordset for the vibration sensor so that it is a suitable distance
away from power supply cables. Shielded cables must be used to ensure reliable data transfer.
A perfect ground connection must be ensured. Always observe the local regulations and
instructions.
12