Updating The Firmware; Restoring The Factory Default Settings Of The Eplug Adapter Connected To The Pc - Hercules ePlug 500 Nano Manual

- Tick the Apply the password to the device connected to the PC only.
If you tick the Apply the password to the device connected to the PC only box, the
adapter connected to the PC will no longer be part of its previous network.
- Click Change the network name.
- In the warning window, click
- Make a note of the network name, then click Close.
On the other adapters:
- Successively connect to your PC each adapter to which you wish to apply the same password.
- Apply the procedure described above to each adapter.
- Plug each adapter back into its original electrical outlet.

3.6. Updating the firmware

To benefit from the latest firmware version, you can visit the Hercules website (http://ts.hercules.com) and
verify whether new firmware is available for your ePlug adapters. Follow the instructions and save the file to
your hard disk drive.
- In the Tools tab, click the
computer.
- Click Update the firmware.
3.7. Restoring the factory default settings of the ePlug adapter
connected to the PC
If you encounter a connection problem, you can restore the factory default settings via ePlug Station.
.
button and select the location of the firmware update file on your
Hercules ePlug 500 Nano
User Manual – 29/73