Table of Contents
Advertisement
Fault messages
Problem
The display shows a
fault number that is not
listed below.
Fault :
The drain pump may
still be running, even
with the door open.
All of the programme
selection indicator
lights are flashing.
Fault number
appears in the time
display.
Possible cause and remedy
There may be a technical fault.
Switch the dishwasher off with the button.
Switch the dishwasher back on after a few
seconds.
Restart the desired programme.
If the indicator lights flash again, there is a technical
fault.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
The Waterproof system has reacted.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
Circulation pump fault.
Switch the dishwasher off.
Switch the dishwasher back on.
Restart the desired programme.
If the fault message appears again, there is a
technical fault.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
Problem solving guide
79
Advertisement
Table of Contents
