Table of Contents
Advertisement
Cleaning and care
In order to clean the inside of the
filter, pull the microfilter downwards
and away from the filter combination.
Rinse all the parts under running
water.
If necessary, use a soft cleaning
brush to remove soiling.
Push the microfilter back onto the
filter combination.
Refit the filter combination so that it
lies flat in the base of the wash
cabinet.
Refit the lower spray arm to the filter
combination using the screw thread.
74
Rotate the screw thread clockwise
until the arrow in the viewing window
points to the lock symbol .
Damage due to soiling entering
the circulation system.
The lower spray arm is used to
secure the filter combination.
Without filters, coarse soiling can
enter the circulation system and
cause a blockage.
Do not run a wash programme
without the lower spray arm or
without the filters fitted.
Advertisement
Table of Contents
