VTech ES2310-2A User Manual page 34

• The alarm volume level is the same as the settings of
the handset ringer volume. If the handset ringer is set to
VolUMe off, the alarm still sounds at VolUMe 1 level.
• During an external call or an internal call, if an alarm is set
and when the alarm time is reached, "alaRM on" will still
flash. An alarm tone will be emitted from the earpiece to
notify you the alarm time is reached. Once you press any
key or press and hold
to the call duration screen.
• During paging or ringing, the alarm will not sound when
the alarm time is reached. However, if snooze function
is enabled, the alarm will sound again at the end of the
snooze period provided that it's not ringing or in paging
mode at the end of the snooze period.
. Press
. Press
3. Press
4. Press
If on is selected:
. Use the keypad to enter the time.
. Press
time and date, and you are prompted to set the snooze
function.
3. Press
4. Press
off
p q
to select Hs seTTIngs.
and
p q
to select alaRM.
and
p q
to select on/off.
and
to confirm.
to confirm. The display shows the current
p q
to select on or off.
then
to confirm.
to disable the alarm, it will revert
30