In The Event Of A Problem - TEFAL AQUA PERFECT HD523 Series Manual

Hide thumbs Also See for AQUA PERFECT HD523 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
EN
If you have any questions, please see the TEFAL international guarantee card enclosed with this
product, where you will find the Consumer Service contact details.
ANTI-SCALE CARTRIDGE PROVIDED WITH THE APPLIANCE
INSTRUCTIONS FOR USE :
As soon as unpleasant odours or white dust are noticeable, change the anti-scale cartridge. For any
questions, please refer to the Tefal international warranty card included with this product where you
will find the Customer Service contact details.
Your replacement cartridge is available under the following code : XD6330F0
STORAGE
When the appliance is not in use, it should be stored in a dry place.
Make sure to empty the tank, clean and dry the appliance before storing it.

IN THE EVENT OF A PROBLEM

Never dismantle your appliance yourself. An incorrectly repaired appliance can be a danger to the user.
Before contacting an approved Service Centre from our network, make sure that the appliance is in the
normal operating position and the air intake and outlet grills are totally unobstructed.
P roblem
The appliance does
not work when swit-
ched on
Possible Cause
The target humidity is reached.
The water level indicator is
blinking.
The water tank isn't well posi-
tioned.
The appliance isn't on a flat
surface.
The water level required has
not yet reached the vaporiza-
tion compartment.
The RH% of the room is over
90%.
Increase the target humidity in CONTROL
MODE or select CONTINUOUS MODE.
Refill the water tank.
Check the positioning of the tank on the
base.
Check the positioning of the appliance (tilt).
Wait at least 20 secs.
Wait till the RH% of the room gets below
80%.
12
What to do

Advertisement

Table of Contents
loading

Table of Contents