Table of Contents
Advertisement
Lubrication Schedule
Lubrication schedule and Symbol Key
12/12= Every year
1/52= Every Week
1/365= Every day
General
Remove the ignition key to prevent unintentional movements during lubrication.
When lubricating with an oil can, it must be filled with engine oil.
When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease.
For daily use, the machine shall be lubricated twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen,
attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other
petroleum products must not be used to clean belts.
LUBRICATION
Lubricate with grease gun
Oil change
Filter change
8011-765-2
Lubricate with oil can
Level check
Husqvarna
49
-
Advertisement
Table of Contents
