Table of Contents
Advertisement
Cutting height lift pedal
On some models, there is a deck assist lift pedal to aid
in maneuvering the deck lift.
IMPORTANT INFORMATION
To obtain an even cutting height it is important
that the air pressure in all four tires is the same
15 psi (1 bar).
Pump release valves
IMPORTANT INFORMATION
Only rotate the valve ¼ to ½ turn to release the
system.
Tighten the valve moderately.
Do not overtighten the valve when closing.
Overtightening can damage the valve seat.
Pump release valves are located on the pumps. These
valves release the system so the machine may be
moved by hand when not running. Tilt the seat forward
to gain access to the valves. Use a
the valve.
CONTROLS
Lift pedal
/
" wrench to open
5
8
Pump release valve
8011-465
8011-507
25
-
Husqvarna
Advertisement
Table of Contents
