Installing/Removing The Battery - dji Mini 2 User Manual

DJI Mini 2 User Manual
The table below shows the battery level during charging.
LED1 LED2
The blinking frequency of the battery level LEDs will be different when using different USB chargers. If
the charging speed is fast, the battery level LEDs will blink quickly. If the charging speed is extremely
slow, the battery level LEDs will blink slowly (once every two seconds). It is recommended to change
the USB-C cable or USB charger.
If the battery is not correctly inserted into the aircraft, LED 3 and 4 blink simultaneously. Insert the
Intelligent Flight Battery again and make sure that it is securely mounted.
The four LEDs blink simultaneously to indicate the battery is damaged.
Battery Protection Mechanisms
The battery LED indicators can display battery protection notifications triggered by abnormal charging
conditions.
Battery Protection Mechanisms
LED1 LED2 LED3
If the charging temperature protection is enabled, the battery will resume charging once the temperature
has returned to within the allowable range. If one of the other battery protection mechanisms activate,
in order to resume charging, it is necessary to press the button to power off the battery, unplug the
charger, and then plug it in again. If the charging temperature is abnormal, wait for the charging
temperature to return to normal and the battery will automatically resume charging without the need to
unplug and plug the charger again.

Installing/Removing the Battery

Install the Intelligent Flight Battery in the aircraft before use. Insert the battery in the battery compartment
and secure the battery clamp. A clicking sound indicates the battery is fully engaged. Make sure that
the battery is fully inserted and the battery cover is secure in place.
©
24 2021 DJI All Rights Reserved.
LED3 LED4
LED4 Blinking Pattern
LED2 blinks twice per second
LED2 blinks three times per
second
LED3 blinks twice per second
LED3 blinks three times per
second
LED4 blinks twice per second
LED4 blinks three times per
second
Battery Level
0% < battery level ≤ 50%
50% < battery level ≤ 75%
75% < battery level < 100%
Fully charged
Battery Protection Item
Overcurrent detected
Short circuit detected
Overcharge detected
Over-voltage charger detected
Charging temperature is too low
Charging temperature is too
high