Cobalt Digital Inc 9934-AUD-PRO Product Manual page 69

Operating Instructions
Table 3-2 9934-AUD-PRO Function Menu List — continued
• Scaler Enable Control
• De-Interlacer Control
• Input/Output Video Status
• Output Format Selector
9934-AUDPRO-OM (V1.1)
9934-AUD-PRO Function Menu List and Descriptions
(Option +UDX only.) Provides up/down/
cross-converter, aspect ratio controls, and user H/V
controls.
Scaler
Enables or disables Scaler function.
Note: When scaler is disabled, all ancillary data is passed from input to
output intact. If the scaler is enabled, ancillary data such as
timecode and closed captioning must be set for re-insertion as
desired. See Timecode (p. 3-44) and Closed Captioning (p. 3-54)
for more information about insertion into scaled output video.
Allows de-interlacer to be bypassed to reduce processing latency.
• Bypassed: De-interlacer is bypassed regardless of conversion
being performed. When converting from interlaced to progressive,
this results in reduced latency at the expense of fast-motion
smoothness.
• Auto-Enable: Applies de-interlacing for interlaced-to-interlaced
conversions where useful (such as 1080i to 525i conversions). This
is the default normal mode which also disables de-interlacing where
not required (e.g., conversions within progressive formats).
• Always Enabled For Interlaced Input: This setting enables
de-interlacing always when an interlaced input format is being
converted by the scaler.
Note: De-interlacer is always bypassed when converting from a
progressive format to a progressive format.
Displays signal format/status sent to scaler and output format/status.
If invalid or no signal is present, none is displayed.
Provides conversions to formats as shown.
9934-AUD-PRO PRODUCT MANUAL
3-29