Cobalt Digital Inc 9934-AUD-PRO Product Manual page 60

3
Table 3-2 9934-AUD-PRO Function Menu List — continued
• Audio DSP Pipeline Select/Setup Pane
(Lower Pane)
Sub-tabs for each DSP pipeline allow selecting a specific pipeline to "go into" and access other settings specific to the enabled
functions. In the running example here with DSP A having Upmixer, RTLL5.1, and Dolby Digital Encoder 5.1 enabled, when
DSP A sub-tab is clicked, a series of applicable lower sub-tabs appear which allow specific setup of the enabled functions. The
processing path to be applied is also shown in the Path Setup window.
If a DSP pipeline has no functions enabled, "Path is disabled" is displayed and no lower sub-tabs appear.
The lower sub-tabs that appear correspond to the setup required for the enabled functions (in the example here, Source Selection
to route PCM inputs to the DSP functions, Upmixer setup, RTLL setup, and finally Dolby Encoder setup).
The tabs that appear are a dynamic function of enabled DSP functions (for example, if Upmixer was not enabled, the
Upmixer sub-tab shown here would not appear).
3-20
9934-AUD-PRO Function Menu List and Descriptions
(continued)
The lower pane that displays when the Audio DSP tab is opened allows
"going into" each enabled DSP pipeline, and setting up attributes for the
pipeline such as signal routing and function-specific settings for the DSP
functions that are enabled.
9934-AUD-PRO PRODUCT MANUAL 9934-AUDPRO-OM (V1.1)