Cobalt Digital Inc 9934-AUD-PRO Product Manual page 34

2
Table 2-1 9934-AUD-PRO Rear I/O Modules — continued
9934-AUD-PRO Rear I/O Module
RM20-9934-E
RM20-9934-F
2-6
Provides the following connections:
• Four 3G/HD/SD-SDI video inputs (SDI IN A thru
SDI IN D)
• Eight AES audio inputs (AES IN 1 thru AES IN 8)
• Four 3G/HD/SD-SDI video outputs; selectable as
processed or input reclocked out
(SDI PROC/RCK OUT 1 thru
SDI PROC/RCK OUT 4)
• Eight AES audio outputs
(AES OUT 1 thru AES OUT 8)
Note: Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9934-E-HDBNC or RM20-9934-E-DIN,
respectively.
1930D
Provides the following connections:
• Two 3G/HD/SD-SDI video input BNCs (SDI IN A
and SDI IN B)
• Three 3G/HD/SD-SDI video output BNCs
(SDI OUT 1A thru SDI OUT 4B; each GUI
selectable as selected-input reclocked or
processed out)
• One relay-protected SDI processed output BNC
(RLY BYP A/B OUT)
• Two opto-isolated GPI inputs (terminals GPI 1-G
and GPI 2-G)
• Two opto-coupled GPO (GPO 1/G and GPO 2/G)
Note: Refer to GPIO, Serial (COMM), and Analog
Audio Connections (p. 2-10) for connector
pinouts and important information regarding
GPO electrical limits.
1928
9934-AUD-PRO PRODUCT MANUAL
Installing a Rear I/O Module
Description
9934-AUDPRO-OM (V1.1)