Cobalt Digital Inc 9934-AUD-PRO Product Manual page 57

Operating Instructions
Table 3-2 9934-AUD-PRO Function Menu List — continued
Routing the DSP Audio Outputs On the Card
Again, depending on whether the DSP is positioned at the card input or output mixer, Audio DSP processed outputs are available
as follows:
•
DSP positioned at the Input Mixer makes its outputs available to the card Audio Bus Channels (as choices on each card
Audio Bus Ch 1 thru Audio Bus Ch 16 drop-down using the Input Audio Routing tab).
•
DSP positioned at the Output Mixer makes its outputs available to the card Embedded, AES, and Analog Audio channels
(as choices on each card output drop-downs using the Output Audio Routing tab).
Note: Dolby encoded audio can only be outputted on digital audio channels such as embedded or AES. However, DSP audio
processed to provide PCM outputs can also be outputted on analog audio output channels. These outputs will be processed
just like any other PCM handled by the card, and converted to analog by the card on-board audio DAC.
In the example here, since DSP A was set up to be positioned at the input mixer, its DSP outputs are routed to the card Audio Bus
channels as shown below.
DSP A Upmix > RTLL 5.1 > 6 PCM Audio DSP A L thru
Audio DSP A Rs routed to card input Audio Bus
Channels Ch1 thru Ch 6, respectively.
The DSP outputs can be used for other internal card
routing or processes, or be available as PCM outputs
from the card via the card Audio Bus.
Emb 1/2
(PCM)
Like any other signals routed to the card Audio Bus,
these outputs are available on any of the card
embedded audio or AES outputs.
9934-AUDPRO-OM (V1.1)
Upmix 5.1 RTLL
9934-AUD-PRO PRODUCT MANUAL
9934-AUD-PRO Function Menu List and Descriptions
(continued)
DSP A Upmix > RTLL 5.1 > 6 PCM + 2 Dolby Digital Encoded
Outputs Audio DSP A Dolby L and Audio DSP A Dolby R
routed to card input Audio Bus Channels Ch 7 and Ch 8,
respectively.
The DSP outputs can be used for other internal card routing or
processes, or be available as outputs from the card via the
card Audio Bus.
Route 5.1 PCM to Audio Bus
Channels 1-6
Dolby 5.1
Digital Encode
Route 5.1 Dolby D pair to
Audio Bus Channels 7/8
3-17