Calibration Of The Thermal Relay - Riello 20034365 Installation, Use And Maintenance Instructions

Installation
4
4.9

Calibration of the thermal relay

The thermal relay serves to avoid damage to the motor due to an
excessive absorption increase or if a phase is missing.
Refer to the table in wiring diagram No. 5 of Appendix A for the
calibration.
2
To reset, in case of an intervention of the thermal relay, press button 1)
of Fig. 21.
Voltage 3 ~ 415 / 240V - 50/60 Hz
The RS 100/M models leave the factory pre-set for 415 V power sup-
ply.
1
Fig. 21
D8267
20035512
17
GB