Snapmaker Artisan Quick Start Manual
Hide thumbs
Also See for Artisan:
- Quick start manual (172 pages) ,
- Quick start manual (28 pages) ,
- Assembly manual (87 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Snapmaker Artisan
Summary of Contents for Snapmaker Artisan
- Page 2 Therefore, after releasing Snapmaker 2.0 in 2019, we started to plan mankind. Dream big and make it happen. on a product that can redefine the capability of a 3-in-1 3D printer. And we brought Artisan to the table—the strongest 3-in-1 3D printer in Snapmaker history.
-
Page 3: Table Of Contents
Before You Start ............................01 1.1 Disclaimer..................................02 1.2 Intended Use ................................... 02 1.3 Safety Information & Compliance ..........................03 1.4 Safety Labels on Your Snapmaker ..........................07 Before You Start 1.5 Specifications .................................. 07 1.6 Parts List ..................................10 1.7 Assembly Instructions ..............................12 1.8 Common Operations .............................. -
Page 4: Disclaimer
Snapmaker. We reserve the right to modify or revise this guide in - Use this product in combination with air purifying devices or in a well-ventilated environment, for some our sole discretion at any time without notice. - Page 5 Model Artisan to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Snapmaker Modular 3-in-1 3D Printer with 3D Printing, Laser Function interference in a residential installation. Engraving & Cutting, and CNC Carving and Cutting functions This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 6: Safety Labels On Your Snapmaker
06-07 Before You Start 1.4 Safety Labels on Your Snapmaker IEC/EN 60825-1:2014, Safety of laser products-Part 1: Equipment EC/EN 60825-1:2014 (Edition 3.0) classification and requirements, RED Article 3.1(a), Safety (RED) (Only applicable to laser function products) Label Warning Location EN 62368-1:2020+A11:2020 RED Article 3.1(a), Safety (RED) - Page 7 Y axis: 400 mm Z axis: 400 mm Stroke Operating Sound ≤ 55 dBA（distance: 1 m） Integrated Controller Snapmaker Luban Dimensions（W × D × H） 189 mm × 300 mm × 191 mm Supported OS Windows, macOS, Linux Touchscreen Size: 7 in.
-
Page 8: Parts List
* The appearance of certain parts may change with product iterations, while their functionalities in offering a reliable user experience will × 1 remain unaffected. * The color of the provided filament that you receive might differ from illustrations in this guide. https://snapmaker.com/... -
Page 9: Assembly Instructions
To avoid missing any important details, please play the videos on a device with a large screen. If you've purchased the 3-in-1 version of Artisan, we recommend that you assemble in the following order to minimize the assembly time and effort: Machine >... -
Page 10: Used Symbols
4. After the firmware download is finished, click Update. Update via USB Flash Drive: 1. Go to our Support Center (https://support.snapmaker.com) > Snapmaker Artisan, then download and save the latest firmware to a USB flash drive; 2. Insert the USB flash drive into the Integrated Controller;... -
Page 11: Printing
16-17 3D Printing 2.1 Preparations 2.1.1 Set Up the Machine 1. Turn on the power switch on the back of the Integrated Controller. 3D Printing To restart your machine, wait for at least 5 seconds after power-off. 2. Follow the on-screen instructions to set up the machine: Read the Terms and Conditions > Choose the language >... - Page 12 Make sure to load the provided PLA filament into the left nozzle and the Breakaway Support filament into the right nozzle, which is required to print the test model of Snapmaker Luban in For the first-time use of the 3D printing function, the Touchscreen will walk you through the necessary later sections.
- Page 13 The Best Pair of Lines X Offset = Default Offset + △ (N × 0.08) Y Offset = △ (N × 0.08) * The XY offsets and the best pair of lines in the graphics above are just examples for better illustration. https://snapmaker.com/...
-
Page 14: Getting Started
2.2 Getting Started 2.2.1 Install Snapmaker Luban 1. On the Snapmaker official website, click Software in the navigation bar. Then, download and install our tailor- made software Snapmaker Luban (hereafter Luban). 2. Launch Luban, select the language, machine model, and module type, and then click Complete to save the settings. - Page 15 Keep the front cover of the Dual Extrusion Module closed throughout the printing process. You can also send the G-code file to your machine at Workspace or via the USB flash drive. For more detailed information, refer to our online User Manual in Snapmaker Wiki (https://wiki.
- Page 16 For more detailed introductions to the 3D printing calibrations, refer to our online User Manual in Snapmaker Wiki (https://wiki.snapmaker.com). Solution 3: Apply an even layer of water-soluble adhesive (like PVP glue sticks) on the printing area to improve the first layer adhesion.
-
Page 17: Maintenance
If the filament residues are difficult to remove even with the palette knife, you can tap Control Share! > Heated Bed on the Touchscreen, heat the bed to 50°C, and try scraping again. To prevent burns, it is recommended to wear gloves before scraping. Share your print in our Facebook group and our forum. https://snapmaker.com/... - Page 18 3. Moisten the wiping cloth with water and gently wipe the build plate surface until there is no obvious grease, dust, or other stains. If it is difficult to remove the grease with water, you can try the ethyl alcohol. https://snapmaker.com/...
- Page 19 2. Power on the machine, tap Control > Filament on the Touchscreen, and heat the target nozzle to 200℃ ; 3. After the nozzle is heated, scrape off the filament residue from the nozzle surface with the wire brush. https://snapmaker.com/...
-
Page 20: Resources
When At least once every two weeks. You can learn more about the usage, maintenance, and troubleshooting of your printer in Snapmaker Wiki: 1. Prepare the cleaning tool: a banister brush (not provided); https://wiki.snapmaker.com 2.
Need help?
Do you have a question about the Artisan and is the answer not in the manual?
Questions and answers