Product Description; Product Design; Proline 500 - Digital; Proline 500 - Endress+Hauser Proline t-mass F 500 Operating Instructions Manual

Product description

14
3 Product description
The measuring system consists of a transmitter and a sensor. The transmitter and sensor
are mounted in physically separate locations. They are interconnected by connecting
cables.
3.1

Product design

3.1.1 Proline 500 – digital
Signal transmission: digital
Order code for "Integrated ISEM electronics", option A "Sensor"
For use in applications not required to meet special requirements due to ambient or
operating conditions.
As the electronics are located in the sensor, the device is ideal:
For simple transmitter replacement.
• A standard cable can be used as the connecting cable.
• Not sensitive to external EMC interference.
 1 Important components of a measuring device
1 Electronics compartment cover
2 Display module
3 Transmitter housing
4 Sensor connection housing with integrated ISEM electronics: connecting cable connection
5 Sensor
3.1.2

Proline 500

Signal transmission: analog
Order code for "Integrated ISEM electronics", option B "Transmitter"
1
2
E S
- C
+
-
4
Proline t-mass F 500 HART
3
5
Endress+Hauser
A0029593