Feed/Separation/Pickup Roller - Toshiba KD-1025 Service Manual

4.5

Feed/Separation/Pickup Roller

[A] Drawer feeding unit
(1) Pull out the drawer for which the drawer
feeding unit will be taken off and the drawer
immediately above.
P.4-1 "[A] Drawers"
(2) Remove 1 screw and pull the drawer feeding
unit toward the inside of the copier.
[B] Separation roller
(1) Take off the drawer feeding unit.
P.4-15 "[A] Drawer feeding unit"
(2) Remove 1 screw and take off the separation
roller holder.
(3) Remove the lever from the holder and take
off the separation roller with the shaft.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Lever
4 - 15
Get other manuals https://www.bkmanuals.com
Upper drawer feeding unit
Lower drawer feeding unit
Fig. 4-39
Fig. 4-40
Separation roller
Fig. 4-41
DISASSEMBLY AND REPLACEMENT
4
Holder
KD-1025