Table of Contents
Advertisement
Quick Links
Instructions
Air Over Oil
Manifold Assembly
- Uses one-way air injectors to inject air into individual valve lube outlet ports -
Model No.: 24B237 (3 sections), 24B239 (4 sections), 24B240 (5 sections),
24B241 (6 sections)
Models without Air Sensor: 24J814 (3 sections), 24J815 (4 sections), 24J816
(5 sections), 24J817 (6 sections)
Can be mounted to standard, Graco MSP Divider Valve. See instruction manual 312497.
250 psi (1.7 MPa, 17 bar) Maximum Air and Fluid Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
US Patent Pending
Model 24B237 shown attached to MSP Divider Valve
Get other manuals https://www.bkmanuals.com
313848C
ENG
Advertisement
Table of Contents
Related Manuals for Graco 24B237
Summary of Contents for Graco 24B237
- Page 1 Models without Air Sensor: 24J814 (3 sections), 24J815 (4 sections), 24J816 (5 sections), 24J817 (6 sections) Can be mounted to standard, Graco MSP Divider Valve. See instruction manual 312497. 250 psi (1.7 MPa, 17 bar) Maximum Air and Fluid Working Pressure Important Safety Instructions Read all warnings and instructions in this manual.
- Page 2 Warnings Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.
- Page 3 Assembly Instructions Assembly Instructions Refer to F . 1 and F . 2. Fig. 1 Valve mounting screw access port Plug 1/8 NPSF (4 places) (Part No. 557776) Injector kit (Part No. 24B246) 1/8 NPT DIN 43650A Connector Air Pressure Sensor (sold separately, Part No. 122375) O-ring (Part No.
-
Page 4: Installation Instructions
NOTE: The Air Over Oil Manifold is designed to mount • Install an air regulator to allow pressure adjustment. to a standard Graco MSP divider valve. For instructions on how to use an MSP divider valve, refer to instruction manual 312497. -
Page 5: Technical Data
Technical Data Technical Data Maximum Air Working Pressure 250 psi (1.7 MPa, 17 bar) Maximum Fluid Working Pressure 250 psi (1.7 MPa, 17 bar) Lubricant Oils up to ISO 460 (2500 sus) Air Inlet 1/8 NPT female Maximum Operating Temperature 200°... - Page 6 Dimension C Dimension D Model inch (mm) inch (mm) inch (mm) inch (mm) 2.89 (73.4) 3.00 (76.2) .718 (18.2) 3.75 (95.3) 24B237 3.815 (96.9) 3.00 (76.2) .718 (18.2) 3.75 (95.3) 24B239 4.74 (120.39) 3.00 (76.2) .718 (18.2) 3.75 (95.3) 24B240 5.665 (143.89)
- Page 7 Notes Notes 313848C Get other manuals https://www.bkmanuals.com...
-
Page 8: Graco Standard Warranty
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.