BMW R 1100 S Additional Installation, Operation And Maintenance Instructions page 54

Changing bulbs
2
52
Rear/brake light
e
Attention:
Switch off the ignition before
changing a bulb.
L
Note:
Do not touch the glass of new
bulbs with the fingers.
Use a clean, dry cloth to hold
the bulbs when inserting them.
1
• Make sure the ground is level
and firm and lift the motor-
cycle onto its side stand
• Remove two screws 3
• Pull rear light glass 2 out
rearwards
• Press bulb 1 forwards and
turn to the left to release
• Remove the bulb
• Installation is the reverse of
the removal procedure
– Brake/rear light bulb:
12 V 21/5 W
2
3