Changing Bulbs - BMW R 1100 S Additional Installation, Operation And Maintenance Instructions

Parking light
e
Attention:
Switch off the ignition before
changing a bulb.
L
Note:
Do not touch the glass of new
bulbs with the fingers.
Use a clean, dry cloth to hold
the bulbs when inserting them.
• Make sure the ground is level
and firm and lift the motor-
cycle onto its side stand
• Turn the handlebars to the left

Changing bulbs

2
• Take off the left rubber cover
• Release the bulb holder 1 by
turning to the right, and pull
it out
• Remove the bulb 2 from the
bulb holder
• Installation is the reverse of
the removal procedure; when
inserted and turned to the left
the bulb holder 1 must be
heard to engage in its
mounting
– Parking light bulb: 12 V 5 W
2
45
1