1
Rear turn indicators
e
Attention:
Switch off the ignition before
changing a bulb.
L
Note:
Do not touch the glass of new
bulbs with the fingers.
Use a clean, dry cloth to hold
the bulbs when inserting them.
• Make sure the ground is level
and firm and lift the motor-
cycle onto its side stand
3
4
2
• Take out retaining screw 1
• Take off the flashing turn indi-
cator glass 4
• Hold bulb housing 2, press
the bulb 3 in and turn it to the
left to release it
• Remove the bulb
• Installation is the reverse of
the removal procedure
– Turn indicator bulb:
12 V 21 W
Changing bulbs
2
51