Table of Contents
Advertisement
Installation
If you intend to install your appliance
"side-by-side" with another refrigera-
tion appliance, please ensure that you
observe the instructions in "Installing
in a side-by-side combination". The
necessary installation parts are sup-
plied with your appliance.
Installation
Two people are required for in-
stalling the appliance.
The appliance must be empty
when it is installed.
Move the appliance carefully on
floors that are sensitive to scratching
to prevent damage.
For easier installation there are trans-
port handles on the back at the top
and transport wheels underneath the
appliance.
Prepare the appliance for installation
as close as possible to its intended
installation location.
Connect the appliance to the electri-
city supply as described in "Electrical
connection".
Move the appliance carefully to its in-
tended installation location.
Position the appliance with the wall
spacers (if used) or the back close to
the wall.
78
Aligning the appliance
To align the appliance, adjust the
front feet using the spanner supplied
Levelling the appliance door
Ensure that you unscrew adjustable
foot from the hinge plate until it
sits on the floor. Then unscrew the
foot by a further ¼ turn.
Advertisement
Table of Contents
