Table of Contents
Advertisement
Childproof lock
en
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
button until the symbol for the time is underlined,
v
and use the
or
button to change the time.
A
@
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
Notes
You can go to the basic settings to specify whether
■
you want the option to set the childproof lock.
~ "Basic settings" on page 16
If a hob is connected, it will not be affected by the
■
childproof lock on the oven.
Activating and deactivating
To activate the childproof lock, the function selector
must be set to the "Off" position.
Press and hold the
'
The symbol for this function will appear on the display.
The childproof lock is now activated.
If a timer duration
Note:
continue to count down. While the childproof lock is
active, the timer duration cannot be changed.
To deactivate the childproof lock, press and hold the
button again for approx. 4 seconds until the symbol
'
goes out on the display.
QBasic settings
T here are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
Basic setting
Audible signal duration upon
™‹‚
completion of a cooking time
or timer duration
Amount of time until a setting
™‹ƒ
is applied
16
button for approx. 4 seconds.
has been set, this will
V
Options
‚
= approx. 10 seconds
ƒ
= approx. 30 seconds*
„
= approx. 2 minutes
‚
= approx. 3 seconds*
ƒ
= approx. 6 seconds
„
= approx. 10 seconds
Button tone that sounds when
™‹„
a button is touched
Brightness of the display illu-
™‹...
mination
Display time of day?
™‹†
Enable childproof lock activa-
™‹‡
tion?
Interior lighting on when
™‹ˆ
appliance in operation?
Cooling fan run-on time
™‹‰
Telescopic rails retrofitted?**
™‹Š
Sabbath mode available?
™‚‹
Reset all values to factory set-
™‚ƒ
tings?
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
--------
Changing the basic settings
The function selector must be set to the "Off" position.
Press and hold the
v
1.
4 seconds.
The first basic setting will appear on the display,
e.g.
™‹‚ ‚
.
Turn the temperature selector to change the setting
2.
as required.
Use the
button to navigate to the next basic
@
3.
setting.
Using the
or
button, continue going through all
A
@
4.
the basic settings as described above, changing the
settings if necessary using the temperature selector.
When you have finished, press and hold the
5.
button again for approximately 4 seconds to
v
confirm the settings.
All basic settings have now been applied.
You can change the basic settings again at any time.
Your changes to the basic settings will be
Note:
retained even after a power failure.
‹
= off
‚
= on*
‚
= dark
ƒ
= medium*
„
= bright
‹
= hide the time
‚
= display the time*
‹
= no
‚
= yes*
ƒ
= yes, with locked door**
‹
= no
‚
= yes*
‚
= short
ƒ
= medium*
„
= long
...
= extra long
‹
= no*
‚
= yes
‹
= no*
‚
= yes
‹
= no*
‚
= yes
button for approximately
Advertisement
Table of Contents
