Midea LC3 Series Technical & Service Manual page 78

Midea LC3 Series DC Inverter Air conditioner Technical Service Manual
MCAC-UTSM-202006
2.5 Steps to dismantle the drain pan
The drain pan must first be removed during the maintenance of the internal unit assembly (make sure that
there is no water in the drain pan). Dismantle the drain pan according to the following schematic to prevent
water leakage in the unit.
Figure a: Dismantle the top cover plate
assembly
Air inlet grille Air inlet direction
Figure 1
Top cover plate
assembly
Figure c: Shift the drain pan assembly
to the left by more than 30 mm
Air inlet grille
Figure 2
You need to add sponges to the air
outlet flange for insulation.
Metallic air diffuser
Figure 3
Drain pan
assembly
Figure b: Rotate the drain pan assembly
by 30 to 45 degrees around the front
horizontal beam
Drain pan
assembly
Figure d: Shift the drain pan
downwards until the drain pan is
removed from the unit body
77
Air inlet direction
Front
beam
Drain pan
assembly
Drain pan
assembly