Table of Contents
Advertisement
GENERAL SPECIFICATIONS
Clamp Size
Diode Test
Continuity Test
Low Battery Indication
Over Range Indication "OL" is displayed
Measurement Rate
Input Impedance
Display
AC Current
AC Voltage Bandwidth 50/60Hz (VAC)
Operating Environment 14 to 122oF (-10 to 50oC)
Storage Environment
Relative Humidity
Altitude
Over Voltage
Battery
Auto Off
Dimensions/Weight
Safety
REPLACING THE BATTERY
1. Open the battery door by loosening the screw using a Phillips head screwdriver.
2. Remove the old battery and discard properly.
3. Insert the new "9V" battery into battery holder, observing the correct polarity.
4. Put the battery door back in place. Secure with the screw.
WARNING: To avoid electric shock, do not operate the multi meter until the battery door is in place
and fastened securely.
Opening 1.2" (30mm) approx.
Test current of 0.3mA typical; Open circuit voltage 1.5V DC typical
Threshold <100Ω; Test current < 1mA
" " is displayed
2 per second, nominal
7.8MΩ (VDC and VAC)
4000 counts LCD
50/860Hz (AAC)
-14 to 140oF (-30 to 60oC)
90% (0 to 30oC); 75% (30 to 40oC); 45% (40 to 50oC)
Operating: 3000m; Storage: 10,000m
Category III 600V
1x "9V" Battery
Approx. 35 minutes
229x80x49mm/303g
For indoor use and in accordance with Overvoltage Category II, Pollution Degree 2. Category II
includes local level, appliance, portable equipment, etc., with transient overvoltages less than
Overvoltage Cat. III.
Advertisement
Table of Contents
