Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Projecta DT830B
Summary of Contents for Projecta DT830B
- Page 1 P/No. DT830B DIGITAL MULTIMETER...
-
Page 2: Operating Instructions
Operating Instructions Measuring DC Voltage 1.Connect the RED test lead to the 'VΩmA' Controls Warning jack and the BLACK test lead to the 'COM' jack The 'ON/OFF' switch is used to turn the meter Do not exceed the meter’s voltage or current limits. 2.Set the Function switch to the correct 'ON'. - Page 3 Measuring AC Voltage Battery Check (Dry Cell, 1.5V & 9V) Measuring Low DC Current (<200mA) 1.Connect the RED test lead to the 'VΩmA' 1.Connect the RED test lead to the 'VΩmA' 1.Connect the RED test lead to the 'VΩmA' jack and the BLACK test lead to the 'COM' jack jack and the BLACK test lead to the 'COM' jack jack and the BLACK test lead to the 'COM' jack 2.Set the Function switch to the correct 'ACV' range.
- Page 4 Battery & Fuse Transistor Check Diode Check The low battery symbol ' ' will be displayed 1.Set the Function switch to the 'hFE' setting. 1.Connect the RED test lead to the 'VΩmA' when the internal 9V battery is low (<7.5V), 2.Turn the meter 'ON' jack and the BLACK test lead to the 'COM' jack indicating that the battery should now be replaced.
- Page 5 Measuring Resistance Measuring DC Current (up to 10A) 1.Connect the RED test lead to the 'VΩmA' 1.Connect the RED test lead to the '10ADC' jack and the BLACK test lead to the 'COM' jack jack and the BLACK test lead to the 'COM' jack 2.Set the Function switch to the correct 'Ω' range.
Need help?
Do you have a question about the DT830B and is the answer not in the manual?
Questions and answers