Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Projecta DT1000
Summary of Contents for Projecta DT1000
- Page 1 P/No. DT1000 CLAMP MULTIMETER...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION Please read this manual thoroughly before use and store in a safe place for future reference WARNING • Do not exceed the maximum allowable input range of any function. • Do not apply voltage to multimeter when resistance function is selected. •... -
Page 3: Current Measurement
FUNCTIONS CURRENT MEASUREMENT Test AC/DC current up to 1000Amps without interfering with test circuit. Test wire up to 30mm in diameter MULTI-TEST Test everything from voltage and frequency, resistance, and continuity along with the ability to test diodes and temperature DATA HOLD FUNCTION Freeze on screen data so you do not lose the recording PRODUCT OVERVIEW... -
Page 4: Meter Functions
METER FUNCTIONS DC/AC CURRENT MEASUREMENTS 1. Set the rotary function switch to the 1000A or 400A or 40A ranges. a. If the range of the measured is not known, select the higher range first then move to the lower range if necessary. 2. Select AC or DC with the MODE button. 3. -
Page 5: Manual Ranging
CAPACITANCE MEASUREMENTS 1. Set the rotary function switch to the CAP position. 2. Insert the black test lead banana plug into the negative COM jack and the red test lead banana plug into the positive V jack. 3. Touch the test leads to the capacitor under test. 4. -
Page 6: General Specifications
GENERAL SPECIFICATIONS Clamp Size Opening 1.2” (30mm) approx. Diode Test Test current of 0.3mA typical; Open circuit voltage 1.5V DC typical Continuity Test Threshold <100Ω; Test current < 1mA Low Battery Indication “ ” is displayed Over Range Indication “OL” is displayed Measurement Rate 2 per second, nominal Input Impedance 7.8MΩ (VDC and VAC) Display... -
Page 7: Electrical Specifications
ELECTRICAL SPECIFICATIONS Range Accuracy Function & Resolution (% of reading) 40.00 AAC ± (2.8% + 10 digits) DC Current 400.0 AAC ± (2.8 % + 5 digits) 1000 AAC ± (3.0 % + 5 digits) 40.00 AAC ± (3.0% + 10 digits) AC Current 400.0 AAC ±... -
Page 8: Warranty Statement
WARRANTY STATEMENT Brown & Watson International Pty Ltd (“BWI”) of 1500 Ferntree Gully Road, Knoxfield, Vic., telephone (03) 9730 6000, fax (03) 9730 6050, warrants that all products described in its current catalogue will under normal use and service be free of failures in material and workmanship for a period of three (3) years from the date of the original purchase by the customer as marked on the invoice. This warranty does not cover ordinary wear and tear, abuse, alteration of products or damage caused by the purchaser.