Advertisement
Advertisement
Related Manuals for Ultenic T10 PRO
Summary of Contents for Ultenic T10 PRO
- Page 1 USER MANUAL Model: T10 PRO...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Safety Warning ·································································································· 02 Inside the Box ···································································································· 04 Product Description ··························································································· 05 Product Operation ···························································································· 08 Product Maintenance ························································································ 13 Product Specifications ······················································································· 16 Troubleshooting ·································································································· 17... -
Page 4: Safety Warning
·If the cleaning area involves a balcony, a the electronic version. physical barrier should be set up to prevent (https://www.ultenic.com). the robot from accessing the balcony and ·Heed all warnings on the robot, battery, ensure it operates safely. - Page 5 ·Children should be supervised to ensure they ·Before cleaning or maintaining the robot, the do not play with the robot. Further, cleaning plug must be removed from the socket. ·Ensure the voltage rating of the enclosed and maintenance must not be performed without adult supervision.
-
Page 6: Inside The Box
INSIDE THE BOX Robot Charging Station Remote Control Mop*4 Rag Bracket*2 Side Brush HEPA Filter Cleaning Brush Dust Bag USER MANUAL Model: T10 PRO User Manual... -
Page 7: Product Description
PRODUCT DESCRIPTION The Robot Reset Button Charging Contacts Recharge Button Dustbin and 360°LIDAR Module Power Button/ Water Tank Clean Button Infrared Sensors Speaker Mopping Dustbin Modules Release Button Cliff Sensors Omnidirectional Wheel Side Brush Right Driving Left Driving Wheel Wheel Main Brush Main Brush Cover... - Page 8 PRODUCT DESCRIPTION 2-in-1 Dual Rotating Dustbin and Water Tank Primary filter holder Secondary Filter Sponge Water Inlet Hepa Filter Dustbin Latch Dustbin Release Button Dust Outlet Rag Bracket Charging Station Dust Bag Handle Cover LED Display Panel Charging Contacts Point Dust Collector Port Dust Bag Pads...
- Page 9 PRODUCT DESCRIPTION Robot Indicator Lights Power Button ·Long press 3S to turn on/off. ·Short press to start/pause cleaning. Recharge Button / Recharge & Power Indicator Press the button to return the robot to the charging station. Press and hold the recharge and start/stop buttons at the same time for 5s to enter network configuration mode.
-
Page 10: Product Operation
PRODUCT OPERATION Before Using Before use, remove all protective parts from The Charging Station is designed to the robot and charging station. automatically empty and charge the Robot. Place on a flat, hard surface at least 0.2 feet (6cm) away from the wall. Ensure that there is 1. - Page 11 1. Download app from the App Store (for iOS) or Google Play (for Android). 2. Open the app and create an account. 3. Tap "+" icon to add "T10 Pro" to your account. 4. Follow instructions in the app to set up Wi-Fi connection.
- Page 12 PRODUCT OPERATION Press the " " button on the robot to activate. Start / Pause Note: The robot control panel will stop lighting up after the robot has stopped for a few minutes. Press the " " button on the robot to activate.
- Page 13 PRODUCT OPERATION ➅ Mopping System Note: 1. To extend the life of the dustbin and water tank, it is recommended to use deionized or demineralized water for mopping. 2. Remove the mop modules before cleaning any carpets. 3. Empty the water tank after mopping is finished.
- Page 14 PRODUCT OPERATION Cleaning Precautions D. Keep the robot away from wet areas. A. Please remove power cords and small objects from the floor that may entangle the robot. E. The Robot can climb over objects less than 0.59 in/15 mm in height. Remove these objects B.
-
Page 15: Product Maintenance
PRODUCT MAINTENANCE Mopping Modules ➄ Before cleaning and maintaining the robot, turn the robot off and unplug the charging station from the outlet. ➀ ➅ ➁ 1. Remove the mop modules from the robot after each use. ➂ 2. Thoroughly rinse the mop cloth and water tank with water and empty the tank. - Page 16 PRODUCT MAINTENANCE Dustbin and Filter 7. Put the HEPA filter back in the dustbin. 8. Attaching the dustbin back to the robot. 1. Press the release button and pull out the dustbin. 2. Open the cover. Main Brush 3. Remove the HEPA filter. 4.
- Page 17 PRODUCT MAINTENANCE Charging Station Side Brush Other Parts If the Robgot dustbin is not emptied or the " " is solid white it may indicate that the charging station duct is blocked. Refer to the image: Unplug and turn over the charging station. Remove the pipe cover with a Phillips screwdriver and remove dirt or debris.
-
Page 18: Product Specifications
Note: Our company manufactures a wide range of parts and accessories. For more information on accessories, please contact Customer Service. PRODUCT SPECIFICATIONS Name Parameters Model T10 Pro ≤5.5H Charing Time Robot Power Rating Rated Working Voltage 14.4V Battery Capacity... -
Page 19: Troubleshooting
TROUBLESHOOTING Conditions Possible Issues Solution When connecting to the router Incorrect router username network, please ensure you enter the and password. correct "user name" and "password". The robot is not within the Ensure the robot is within the router s network coverage. - Page 20 Please ensure the charging station Too many obstacles near the has 2 feet of clear space on either charging station. side and 5 feet in front. Please ensure the power cord is The charging station is not connected (reference: charging connected to a power source.
- Page 21 Before cleaning, please remove scattered wires, mops and other Wires and other easily entangled objects from the ground. If the robot objects on the floor will affect the misses an area while scanning, it will robot s operations. automatically re-scan the area. Please do not interfere (such as moving the robot or interfering with its route).
- Page 22 pilot lamp Possible Issues Solution 1. Frequent dust collection leads to fan Fan Error overheating protection or fan malfunction. It is recommended to try to collect dust after 30 minutes; Overheating 2. Ensure that the cover of the Flashing Red Charging Station is completely closed and the Robot is properly The charging station cover is not...