Table of Contents
Advertisement
CAUTION
Ground the air conditione r .
D o no t co nne c t t h e g r oun d wi r e t o ga s o r wa t e r p ipe s ,
l i g ht n i n g ro d o r a te l e p h o n e gr o u n d wi re .
grounding may result in electric shocks.
Be sure to install an earth leakage breake r .
F ailu r e t o in st al l a n ea rt h lea k ag e b r ea k e r m a y r e s ul t i n
electric shocks.
Connect the outdoor unit wires , then connect the indoor
unit wires.
Y ou are not
allowed
to connect the air conditioner with the
power supply until the wiring and piping is done
Properly install drain piping to ensure proper drainage
an d insulat e pipin g i n orde r t o preven t condensation.
Imprope r drai n pipin g ma y resul t i n wate r leakag e an d
property damage.
Install the indoor and outdoor units, power supply wiring
and connecting wires
fro m television s o r radio s i n orde r t o preven t imag e
interference or noise.
Depending on the radio waves, a distance of 1 meter may not
be su f ficient enough to eliminate the noise.
The unit is not intended for use by young children without
supervision.
D on' t in s t a l l th e a i r c ondition e r i n th e followin g
conditions:
In a flammable environment existing.
In highly corrosive areas.
In unstable power sources.
In kitchen or cooking areas.
There is strong electromagnetic wave existing.
2. INSTALLATION INFORMATION
Please read this "installation manual" competely before
installing or servicing unit.
The air conditioner must be installed by qualified persons.
When installing the indoor unit or its tubing, please follow
this manual as strictly as possible.
If the air conditioner is installed on a metal part of the
building, it must be electrically insulated according to the
relevant standards to electrical appliances.
When all the installation work is finished, please turn on
the power only after a thorough check.
This manual is subject to change without notification.
installation manual
2
Ina p pr o pr i at e
.
should b e
at least 1 meter away
INS T ALL A TION ORDER
Select the location;
Install the indoor unit;
Install the outdoor unit;
Install the connecting pipe ;
Check for leaks;
Connect the drain pipe;
Wiring;
T est operation.
3. INSPECTING AND HANDLING THE UNIT
A t deliver y , th e packag e shoul d b e checke d an d an y damag e shoul d
be reported immediately to the the service agent.
When handling the unit, take into account the following:
F r agile, handle the unit with care.
1
Keep the unit upright in order to avoid compressor
damage.
Choose on before hand the path along which the unit is to be
2
brought in.
Move this unit as originally package as possible.
3
4
W he n li ft in g t h e uni t , alwa y s u s e p r o t e ct o r s t o p r e v en t damage
and pay attention to the position of the unit ' s centre of gravity.
Advertisement
Table of Contents
