Home Connect; Setting Up The Home Connect App; Setting Up Home Connect; Activating Wi-Fi On The Appliance - Siemens WM14VKH0GC User Manual

The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
Please consult the documents sup-
¡
plied by Home Connect.
Please also follow the instructions
¡
in the Home Connect app.
Notes
Please note the safety precautions
¡
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
Operating the appliance on the ap-
¡
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
16.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
your mobile device.
1
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
1
Apple App Store und the Apple App Store logo are trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
16.2 Setting up Home Con-
nect
Requirements
The Home Connect app has been
¡
installed on your mobile device.
Wi-Fi has been activated on the
¡
router.
The appliance is receiving signals
¡
from the WLAN home network (Wi-
Fi) at its installation location.
Use the Home Connect app to
1.
scan the QR code.
Follow the instructions in the
2.
Home Connect app.
16.3 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold Remote Start
1.
approx. 3 seconds.
Set the programme to position 4.
2.
The display shows Con.
a
Press Start / Reload repeatedly
3.
until the display shows On.
Wi-Fi is activated.
a
Home Connect en
for
35