Home Decorators Collection WINDWARD 68000 Use And Care Manual page 12

Preparing the Remote Control
Pairing the Remote Control
NOTE: The remote control has already been paired to the ceiling fan
for your convenience. If you have two of the same model fans in your
home, please follow the steps below to control each fan independently.
NOTE: The battery will weaken with age and should be replaced
before leaking takes place as this will damage the remote control.
Dispose of used battery properly and keep the battery out of the reach
of children.
□
Remove the battery cover by pressing firmly on the arrow and
sliding the cover off.
□
Install two 1.5V AAA batteries (included).
□
Slide the dip switch in the battery compartment to the "1" setting.
□
Confirm that the power to the fan is off at either the wall switch or
breaker box.
□
Return power to the fan at the wall switch or breaker box.
□
Press and release the "Learn" button located in the remote's
battery compartment within 30 seconds.
□
If pairing is successful, the fan's light kit will flash and the blades
will begin to spin.
□
Replace the battery cover on the remote control.
12