Case Dimensions - Siemens 7SR210 Argus Quick Start Manual

Case Dimensions

150
PANEL CUT-OUT
130
10
NOTE:
THE 3.6 HOLES ARE FOR M4 THREAD FORMING (TRILOBULAR) SCREWS. THESE ARE SUPPLIED AS STANDARD AND ARE SUITABLE FOR USE IN FERROUS / ALUMINIUM PANELS
1.6mm THICK AND ABOVE. FOR OTHER PANELS, HOLES TO BE M4 CLEARANCE (TYPICALLY 4.5 DIAMETER) AND RELAYS MOUNTED USING M4 MACHINE SCREWS, NUTS AND
LOCKWASHERS (SUPPLIED IN PANEL FIXING KIT).
Fig 3. E6 Case overall dimensions and panel drilling details (All dimensions in are mm)
201.5
PANEL CUT-OUT
182
9.75
NOTE:
THE 3.6 HOLES ARE FOR M4 THREAD FORMING (TRILOBULAR) SCREWS. THESE ARE SUPPLIED AS STANDARD AND ARE SUITABLE FOR USE IN FERROUS / ALUMINIUM PANELS
1.6mm THICK AND ABOVE. FOR OTHER PANELS, HOLES TO BE M4 CLEARANCE (TYPICALLY 4.5 DIAMETER) AND RELAYS MOUNTED USING M4 MACHINE SCREWS, NUTS AND
LOCKWASHERS (SUPPLIED IN PANEL FIXING KIT).
Fig 4. E8 Case overall dimensions and panel drilling details (All dimensions are in mm)
Siemens Protection Devices Limited
11 31
Typical
when SIDE VIEW
fitted
MINIMUM CLEARANCES:
25mm FOR TERMINAL WIRING
45mm FOR ETHERNET COMMS MODULE
70mm FOR F/O COMMS CABLE
Diameter 3.6 - 4 holes (see note)
11 31
Typical
when
fitted
MINIMUM CLEARANCES:
25mm FOR TERMINAL WIRING
45mm FOR ETHERNET COMMS MODULE
70mm FOR F/O COMMS CABLE
Diameter 3.6 - 4 holes (see note)
Case Earth
216.5
connection
Case Earth
216.5 connection
SIDE VIEW
155.5
FRONT VIEW
207.5
FRONT VIEW
10