Operation - Kogan FFLDBLTREDA User Manual

OPERATION

Plug the power cable into an electrical outlet and place the red switch in the ON position.
The switch will illuminate, the treadmill will emit a "drip" sound and the display will turn on.
Turning the Treadmill On/Off
1. Press the Power button on the remote control to turn the treadmill on.
2. Press the Power button on the remote control again to turn the treadmill off.
Note: To ensure the safety of users, do not turn the treadmill off while it is still moving.
Instead wait till it comes to a complete stop before pressing the Power button.
3. Press the start/stop button on the remote control to start the walking machine. When
you have finished, press the start/stop button to treadmill.
4. To better maintain your treadmill and extend its life span, it is recommended that you
turn off the power after continuous use for 2 hours and let the machine rest for 10
minutes before use.
Adjusting the Speed
•
Speed increase button: Press the Speed Increase button to raise the speed of the
treadmill in "0.1/time" increments. If this button is held down for more than 2 seconds,
the speed will continuously increase.
•
Speed decrease button: Press the Speed Decrease button to raise the speed of the
treadmill in "0.1/time" increments. If this button is held down for more than 2 seconds,
the speed will continuously increase.
Changing Modes
When the treadmill is in standby, press the Mode button on the remote to cycle through 3
different countdown modes of operation (Time, Distance & Calorie).
After selecting one of the 3 modes, use the speed increase and decrease buttons to set the
countdown values. After setting, press the "Start" key to start the Treadmill.
Display
•
Speed: Displays your workout speed value.
•
Time: Shows your elapsed workout time in minutes and seconds (0.0 - 99.00 min).
•
Distance: Displays the accumulative distance travelled during your workout (0.0 –
99.99 MI).
•
Calories: Displays the accumulative calories burned during your workout (0 – 999.9 C).