Table of Contents
Advertisement
Product and Feature Description
The TDS3000C series oscilloscopes consist of the following models:
Model
TDS3012C
TDS3014C
TDS3032C
TDS3034C
TDS3052C
TDS3054C
Acquisition Features
WaveAlert Waveform Anomaly Detection.
detects anomalous waveforms by comparing the current waveform to
the previous waveform. WaveAlert sets how the oscilloscope responds:
stop on anomaly, beep on anomaly, and save anomalous waveform to a
USB flash drive. It's useful for capturing signal glitches and intermittent
waveform errors. (See page 69.)
Separate Digitizers.
with separate digitizers for each channel. Each digitizer can sample at
up to the maximum sample rate; the acquisition on all channels is always
concurrent to provide full single-shot bandwidth on each channel.
Normal Acquisition.
capture horizontal detail, and then you can use the zoom
analyze the detail. (See page 67.)
Fast Trigger Acquisition.
per second (500 point mode) so you can see rapidly changing signals or
intermittent signal irregularities. (See page 67.)
Pretrigger.
You can position the trigger point at the beginning of the acquisition, at
the end, or at any location in between. (See page 81.)
TDS3000C Series Oscilloscopes User Manual
Channels
2
4
2
4
2
4
This feature ensures accurate timing measurements
This feature acquires 10,000 point waveforms to
This feature acquires up to 3,400 waveforms
You can capture signals that occur before the trigger point.
Bandwidth
100 MHz
100 MHz
300 MHz
300 MHz
500 MHz
500 MHz
This feature automatically
Getting Started
Maximum
1.25 GS/s
1.25 GS/s
2.5 GS/s
2.5 GS/s
5 GS/s
5 GS/s
function to
5
Advertisement
Table of Contents
