Table of Contents
Advertisement
Specifications
Product and Feature Description
TDS6000B Series Specifications and Performance Verification Technical Reference
This chapter contains the specifications for the TDS6000B Series. All specifica-
tions are guaranteed unless labeled "typical." Typical specifications are provided
for your convenience but are not guaranteed. Specifications that are marked with
the n symbol are checked in the Performance Tests section. Unless noted
otherwise, all specifications apply to all TDS6000B Series oscilloscopes.
To meet specifications, the following conditions must be met:
H The oscilloscope must have been calibrated in an ambient temperature
between 20 °C and 30 °C (68 °F and 86 °F).
H The oscilloscope must be operating within the environmental limits listed in
Table 1- -11, page 1- -17.
H The oscilloscope must be powered from a source that meets the specifica-
tions listed in Table 1- -9, page 1- -15.
H The oscilloscope must have been operating continuously for at least 20
minutes within the specified operating temperature range.
H You must perform the Signal Path Compensation procedure after the
20-minute warm-up period, and the ambient temperature must not change
more than 5 °C (9 °F) without first repeating the procedure. See page 3- -2 for
instructions to perform this procedure.
Your TDS6000B Series is shown in Table 1- -1.
Table 1- 1: TDS6000B Series
Number of
channels
Model
TDS6604B
4
TDS6804B
4
Maximum sample
rate (real time)
Bandwidth
6 GHz
20 GS/s
8 GHz
20 GS/s
1- 1
Advertisement
Table of Contents
