Operation - Rowenta CLASSIC SO2210FO Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
RO_HEATER_CLASSIC_SO2110F0_NC00112130-01_Mise en page 1 27/04/12 10:12 Page11
4 - SAFETY
Heat safety
• In the event of abnormal overheating, a safety device shuts down the appliance and then
automatically restarts it once it has cooled. If the fault persists or gets worse, a thermal fuse shuts
the appliance down definitively and it must then be taken to an approved service centre.

5 - OPERATION

Before turning the unit on, make sure:
- it is positioned as described in these instructions,
- that it is placed in a flat and horizontal position, and;
- that the air intake and outlet screens are free of all obstacles.
• Indicator :
On/Off indicator B, lights up when the unit is turned on.
• Thermostat:
Adjust the temperature setting, according to your own comfort, by turning
button A
• Frost-free setting
This setting enables you to automatically maintain the temperature above 0°C
in a normally insulated room, whose volume corresponds to the power of your
appliance (2000W).
Plug in the unit and turn switch A to line up the marking on the switch with the "
6 - CLEANING
• Your appliance must be unplugged before proceeding with any cleaning work.
• You can clean it with a slightly damp cloth.
• IMPORTANT: Never use abrasive products which might damage the appearance of your appliance.
• We recommend that you clean the air inlet and outlet grills at least once a year; (clean with a
vacuum cleaner if necessary).
7 - STORAGE
• It is extremely important that the unit be allowed to cool down before it is put away.
• When storing your appliance, you can wind the lead around the stand and clip the end into the
lead clip (F).
• When you are not using your appliance, store it in a dry place.
8 - IN THE EVENT OF PROBLEMS
• Never dismantle your appliance yourself. A poorly repaired appliance may be dangerous for the
user.
• Before contacting one of our Approved Service Centres (see enclosed list), ensure that:
– the appliance is set to normal operating mode;
– the air inlet and outlet grills are totally clear.
9 -ENVIRONNEMENT PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or recycled. Leave it at
a collection point.
:
EN
" symbol.
11

Advertisement

Table of Contents
loading

Table of Contents